- Product Categories
- Friendly Links
Information Name: | Supply Soundcraft Soundcraft mixer EPM12 |
Published: | 2012-03-15 |
Validity: | 180 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | 12 Group 2 stereo mic 60mm fader mixer EPM mixer with three standard configurations, respectively, 6-channel (EPM6), 8-channel (EPM8), 12-channel (EPM12). Each type of mixer are two additional stereo inputs, EPM Series deliver high-quality mixing, and taking control of the region to reduce unnecessary equipment, more easy to operate. EPM mixer with advanced technology and design, has a very high price. Shape design runs through a simple design and excellent accessories can be used to achieve high-precision EQ, magnification setting. EPM's GB30 mic amp is Graham Blyth for the company's 30th anniversary celebration was deliberately introduced products, the sound transparent and widely used LX7ii and GB large console. The amplifier of 55 dB can be achieved within the volume control, while its value as high as 22 db headroom to meet the user's relentless pursuit of the perfect sound quality. EPM professional 48-volt phantom power to condenser microphones of all types suitable configuration. EPM mixer is unique in that its peak monitoring system. It uses a multi-signal design can be measured in different regions of the letter with the overload condition monitoring. EPM also LED indicator tends to peak in the signal value will increase brightness. EPM mixer with a 60 mm high-precision potentiometers can accurately control the mix. EPM mixer from the use of two auxiliary bus switches, all main connectors are professional XLR-type 1 / 4 inch metal jack. RCA connectors can be realized album, stereo playback inputs and record outputs. The standard single-channel EQ tri-band design, a two-band stereo EQ design. All channel inputs and TRS connectors are used to achieve mixing output. EMP panel design also uses a 10-segment LED output parameter monitor, headphone output ports. EMP and headphones can work simultaneously, musicians can listen to the audio mixer, while the output from the headphones to listen to music directly. EMP console's bottom An AC power supply with universal interface to facilitate the location of the console placed in the wall, while its design to avoid messy wiring exposed. All models in the series can be installed in order to move the frame bar. EMP can be widely used in live performance, sound recording and multi-speaker systems. Mono input Microphone input (Mic Input) Built-in LEXCION (Lai Xikang) effects, convenient and practical, is generally applicable to small multi-purpose hall and other places Connected to a balanced XLR connector accepts balanced or unbalanced microphone input. -128dBu equivalent input noise of the low-noise mic preamps, bright, quiet sound. Line (Line Input) Connected to a balanced 1 / 4 "microphone jack, balanced or unbalanced connection signal of electronic musical instruments such as keyboards. Insert (Input) Used as a compressor to adjust or increase the tone of EQ and other signal processors. If necessary, can be used multiple sound track recording. Gain (Gain) Each input, there is a rotary gain control, adjust the input signal gain, gain adjustment range of +5- +60 dB. Preamplifier in a smooth linear gain control circuit transmission EQ section Divided into 3-band EQ. HF high-frequency band for more than 12KHz provides 15dB of boost or attenuation. Two intermediate frequency sweep control for 140Hz-3KHz IF frequency range to provide 15dB of boost or attenuation. LF low frequency lower than 80Hz frequency control to provide ± 15dB of boost or attenuation. AUX auxiliary part Monitor for the separation transmitted signal mixing, or on each input channel 2 AUX send signals all the entertainment needed. Each AUX bus master fader can be switched to the front or back. Pan controls (pan), mute (Muting) and SOLO Pan on each channel contains audio-visual adjustment range left, center and right stereo pan position of all control. Mute button all the signal attenuation. SOLO button to listen Minato signal transmission alone. Fader (Faders) and signal instruction sheet Every single channel has a smooth 60mm fader travel (attenuator), and indicate more than +17 dBu peak LED indicator Stereo Input Input connector Stereo input signal is connected via balanced 1 / 4 "input jacks other professional audio equipment, sending the best sound signal. EQ section There are two fixed-frequency controller. HF high-frequency signals to control the frequency points 12KHz, LF low frequency signal to the control frequency 80Hz, adjustable range of ± 15dB. AUX auxiliary part Each stereo input channel has two AUX sends. According to the main control part of the selection, the signal can be sent to pre-fader or post-fader, or for use as a monitor mix effects processing. Balance (Bal), mute (Muting) and pre-listening (PFL) Sent to the balance control to adjust left and right channels of the various signals. Mute and SOLO buttons operate by mono input, stereo channel attenuation or SOLO, SOLO button press before the bus fader signal to the headphones, control room output and instruction sheet. Fader and instruction sheet Each mono channel has a 60mm long stroke and a fader signal level exceeds +17 dBu peak LED indicator. Input connector Balanced stereo input connected by a 1 / 4 "microphone jack to connect, enter other professional audio equipment, the signal sent. EQ There are two adjustable attenuation to enhance the controller to regulate the range of ± 15dB, adjust the frequency of high-frequency 12KHz, adjust the frequency of low-frequency 80Hz. AUX auxiliary send level adjustment 2 stereo input channels with AUX send level control. Signal (based on monitoring or effects processing for mixing) by the main control to choose from pre-fader or post-fader sends. Balance, mute and pre-listening Signal is sent to the number of left and right channel balance adjustment control (pan). Mute (mute) and Minato alone (SOLO) key operation with a mono input. Press SOLO, pre-fader signal to the headphones, control room output and instruction sheet. Fader and overload indication Each stereo channel has a smooth travel 60mm faders and a direction signal level exceeds +17 dBu peak LED indicator. The main control section Phantom power +48 V phantom power provided by a button, when activated, LED lights. 2 track recorders input and output 2 track recorder's inputs and outputs are connected with unbalanced RCA connectors. Playback path for the input to the monitor system or headphone listening. Playback mix direct signal path for playback mixer, replace any existing signal. Monitor output and mix inserts Balance of the connection 1 / 4 "microphone jack connector Mix and mono sum output Mixing the left and right channels connected to the main output of a balanced XLR connector. Playback level 2-channel playback input gain level control to provide playback Monitor and headphone output level Sent to the monitor output and headphone output level can be used both rotary potentiometer adjustment. When a pair of headphones into the headphone jack of the mixer, the monitor output tuner while still listening to operate. Fader and instruction sheet With 2 60mm stroke faders control the overall stereo mix output level. Two rows of three colors of the 10 segment peak LED meters monitor the left and right channel output level. Level meter is usually used to select the listening level to follow the instructions. So press the PFL (pre-fader listen) or AFL (after fader listen), when, LED level meter also switches to monitor the location of choice, and SOLO AFL / PFL LED will light up. |
Admin>>>
You are the 70021 visitor
Copyright © GuangDong ICP No. 10089450, Guangzhou Hongchuang Lighting Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 70021 visitor
Copyright © GuangDong ICP No. 10089450, Guangzhou Hongchuang Lighting Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility